【product manual】

SPS-PS200 is a non-contact jet dispensing valve, which can be widely used in the controllable flow of various adhesives such as surface mount adhesive, conductive silver paste, IC packaging adhesive, underfill, sealant, surface coating adhesive, etc. , High-speed dispensing operation. It can not only be injected into a narrow space as small as a hundred microns, but also can be used to complete precise dispensing with a weight of 0.01 milligrams at a specified location.

【Features and Advantages】

☆High speed

There is no need for Z-axis movement necessary for traditional needle dispensing technology, and the dispensing speed is more than 3 times that of needle dispensing.

☆High precision

The minimum dispensing volume can reach 5 nanoliters, the smallest dot diameter can be controlled to 0.2mm, and it has a consistency that traditional needle dispensing cannot match.

☆High flexibility

The SPS-PS200 is insensitive to the dispensing height, which can avoid the defects caused by the needle colliding with the workpiece; the extremely small dispensing volume allows the SPS-PS200 to work in a more compact space and complete the dispensing process that cannot be achieved with needle dispensing.

☆Low maintenance and long life

The advanced structure design makes daily cleaning and maintenance simple and easy. The most advanced nano wear-resistant material accessories are more than 20 times longer than the life of ordinary materials.

【Product Specifications】

Model SPS-PS200

Minimum driving air pressure: 90psi

Maximum working frequency: 200cycles/s

Optimal feeding pressure: 0~0.3Mpa

Minimum point diameter: 0.2mm

The best viscosity range: 1~20000Cps

Dimensions: 152mm*30mm*144mm

Weight: 650g

Feeding component: stainless steel connector to needle cylinder (standard configuration)

                     Inverted plug connection pipe (optional)

Can be connected to the syringe specifications: 3cc, 5cc, 10cc, 30cc, 55cc

Can receive material pipe specifications: 4 in charge, 6 in charge

Main valve body: stainless steel

Fluid channel: stainless steel

Firing pin assembly: special high-strength material 303

Nozzle assembly: special high-strength material

Fluid sealing ring: PTFE 301

Gas seal: polyurethane

Other O-rings: Nitrile rubber

Solenoid valve: 24V (DC) 5W (optional)

Heating block: 6061 AL anodized (optional)

Heating tube: 110V (DC) 50W (optional)

Maximum heating temperature: 80℃